Om605 pump on om602

STD Tuning Engine Om605 pump on om602

Om605 pump on om602

View a Printable Version

0 Vote(s) - 0 Average

k2igukast

Naturally-aspirated

14

02-10-2015, 07:01 AM #1

Is it possible to install an om605 turbo fuel pump on a om602? I am aware, that its fuel flow is partially controlled electronically. Should I install it together with the electrical parts?

k2igukast

02-10-2015, 07:01 AM #1

Is it possible to install an om605 turbo fuel pump on a om602? I am aware, that its fuel flow is partially controlled electronically. Should I install it together with the electrical parts?

baldur

Fast

509

02-10-2015, 07:12 AM #2

Yes if you have all the electronics to control it, it will drop right in. Note that the 605 has an engine speed sensor on the flywheel which you must fit or duplicate.

Baldur Gislason

baldur

02-10-2015, 07:12 AM #2

Yes if you have all the electronics to control it, it will drop right in. Note that the 605 has an engine speed sensor on the flywheel which you must fit or duplicate.

Baldur Gislason

k2igukast

Naturally-aspirated

14

03-02-2015, 10:53 AM #3

What hp expected full loaded om605 pump on om602? I dont need ECU, right?

k2igukast

03-02-2015, 10:53 AM #3

What hp expected full loaded om605 pump on om602? I dont need ECU, right?

barrote

Superturbo

1,627

03-02-2015, 04:07 PM #4

funny , how do u imagine to control a EDC pump without a ECU Wink

FD,
Powered by tractor fuel

barrote

03-02-2015, 04:07 PM #4

funny , how do u imagine to control a EDC pump without a ECU Wink

FD,
Powered by tractor fuel

k2igukast

Naturally-aspirated

14

03-03-2015, 02:08 PM #5

Oh fuck, my bad.

k2igukast

03-03-2015, 02:08 PM #5

Oh fuck, my bad.

baldur

Fast

509

03-03-2015, 02:57 PM #6

(03-02-2015, 04:07 PM)barrote funny , how do u imagine to control a EDC pump without a ECU

Easy, just rig up a throttle lever to the rack. It won't be possible to idle but it'll drive fine otherwise.

Baldur Gislason

baldur

03-03-2015, 02:57 PM #6

(03-02-2015, 04:07 PM)barrote funny , how do u imagine to control a EDC pump without a ECU

Easy, just rig up a throttle lever to the rack. It won't be possible to idle but it'll drive fine otherwise.

Baldur Gislason

Petar

7.5mm M pump

459

03-03-2015, 03:21 PM #7

(03-03-2015, 02:57 PM)baldur
(03-02-2015, 04:07 PM)barrote funny , how do u imagine to control a EDC pump without a ECU

Easy, just rig up a throttle lever to the rack. It won't be possible to idle but it'll drive fine otherwise.

No rev limiter either lol Big Grin

Seriously take the pump from your 602 engine and the 605 pump and have a shop swap the elements and adjust the pump. Wink

Petar

03-03-2015, 03:21 PM #7

(03-03-2015, 02:57 PM)baldur
(03-02-2015, 04:07 PM)barrote funny , how do u imagine to control a EDC pump without a ECU

Easy, just rig up a throttle lever to the rack. It won't be possible to idle but it'll drive fine otherwise.

No rev limiter either lol Big Grin

Seriously take the pump from your 602 engine and the 605 pump and have a shop swap the elements and adjust the pump. Wink

barrote

Superturbo

1,627

03-03-2015, 05:15 PM #8

(03-03-2015, 03:21 PM)Petar
(03-03-2015, 02:57 PM)baldur
(03-02-2015, 04:07 PM)barrote funny , how do u imagine to control a EDC pump without a ECU

Easy, just rig up a throttle lever to the rack. It won't be possible to idle but it'll drive fine otherwise.

No rev limiter either lol

Seriously take the pump from your 602 engine and the 605 pump and have a shop swap the elements and adjust the pump.

very nice idea u boys gave me, next saturday i will hook a string pushing the rack forward, and conected to the full pedal.
i´ll cal it the "afterburner"

good luck though.

FD,
Powered by tractor fuel

barrote

03-03-2015, 05:15 PM #8

(03-03-2015, 03:21 PM)Petar
(03-03-2015, 02:57 PM)baldur
(03-02-2015, 04:07 PM)barrote funny , how do u imagine to control a EDC pump without a ECU

Easy, just rig up a throttle lever to the rack. It won't be possible to idle but it'll drive fine otherwise.

No rev limiter either lol

Seriously take the pump from your 602 engine and the 605 pump and have a shop swap the elements and adjust the pump.

very nice idea u boys gave me, next saturday i will hook a string pushing the rack forward, and conected to the full pedal.
i´ll cal it the "afterburner"

good luck though.

FD,
Powered by tractor fuel

View a Printable Version

0 Vote(s) - 0 Average

Users browsing this thread:
5 Guest(s)