STD Tuning Engine Oil Temp and Pressure sender location?

Oil Temp and Pressure sender location?

Oil Temp and Pressure sender location?

 View a Printable Version
 
  • 0 Vote(s) - 0 Average
 
Booster
Find
GT2559V

240
04-01-2015, 02:24 PM #1
Reply
Reply
Where does everyone put there Oil temp and pressure senders?? 

This is on a om605.


What thread is used also? 1/8th not??


Thanks!
Booster
04-01-2015, 02:24 PM #1

Where does everyone put there Oil temp and pressure senders?? 

This is on a om605.


What thread is used also? 1/8th not??


Thanks!

Reply
Reply
barrote
Find
Superturbo

1,627
04-01-2015, 03:15 PM #2
Reply
Reply
got mine bolted in the filter housing in a flat surface. pressure sender is the original MB.
FD,
Powered by tractor fuel
barrote
04-01-2015, 03:15 PM #2

got mine bolted in the filter housing in a flat surface. pressure sender is the original MB.

FD,
Powered by tractor fuel

Reply
Reply
Booster
Find
GT2559V

240
04-01-2015, 03:21 PM #3
Reply
Reply
(04-01-2015, 03:15 PM)barrote got mine bolted in the filter housing in a flat surface. pressure sender is the original MB.

I can't see where you mean? original fitment? I don't suppose you have a picture? 

Thanks
Booster
04-01-2015, 03:21 PM #3

(04-01-2015, 03:15 PM)barrote got mine bolted in the filter housing in a flat surface. pressure sender is the original MB.

I can't see where you mean? original fitment? I don't suppose you have a picture? 

Thanks

Reply
Reply
barrote
Find
Superturbo

1,627
04-02-2015, 05:47 AM #4
Reply
Reply
yep i dont,
remome the filter housing, they usually are interchangeable, drill a hole in a flat surface in such a way that it does not disturb the filter element. cut a thread and bolt on the temp sender. usually they look like a bolt. sender for pressure transmiter u can have from the original plug, even if your car filter housing does not have the plug there, u have the hole tapped there. actually usually there is 2 of them , but one is not suitable for press take.
FD,
Powered by tractor fuel
barrote
04-02-2015, 05:47 AM #4

yep i dont,
remome the filter housing, they usually are interchangeable, drill a hole in a flat surface in such a way that it does not disturb the filter element. cut a thread and bolt on the temp sender. usually they look like a bolt. sender for pressure transmiter u can have from the original plug, even if your car filter housing does not have the plug there, u have the hole tapped there. actually usually there is 2 of them , but one is not suitable for press take.

FD,
Powered by tractor fuel

Reply
Reply
 View a Printable Version
 
  • 0 Vote(s) - 0 Average
Users browsing this thread:
 3 Guest(s)
Users browsing this thread:
 3 Guest(s)