OM606 throttle
OM606 throttle
Ok,
So I am working on a 722.6 swap for a customer that has a N/A 606 and will be swapping later to a Turbo. I am looking at the throttle linkage for a TPS setup and realized that this will change with the turbo engine. What setup are you guys using for the mechanical pump in the turbo engines? I want to make sure that I locate everthing so it is easy to change the TPS later. Pictures would be great.
This is in a w124 chassis.
Here's how @HoleshotHolset did his
Manifold cutout
Welded custom bracket:
Finished linkage:
Some other people attach the cable directly to the pump and use the place where the fuel heater was mounted for a bracket.
I personally don't like this solution but hey it works
Sweet. Thanks.
I like the way I am doing the TPS on the original transmission cable location with this setup. It looks factory. So when the T-engine goes in I will just do that setup. Keep it simple.
This is the tcu placement and harness layout in the car.