Alda adjustment on OM606
Alda adjustment on OM606
I have a G wagen with OM606 and mechanical pump with 6mm elements.
Bedore I send my pump off to dieselmeken for 7.5 mm to help on increase low torque for my g wagen I would first like to adjust my alda. This made a huge difference on my old 617a so would like to give it a go!
But I have the round style alda instead of the more common flat style one. Mine is the same as in the picture attached
Question is how do I adjust one of these, can i screw out the set screw or should I shim it up a bit, can this even be done?
Thanks for all advice
Richard
Hello,
I have a G wagen with OM606 and mechanical pump with 6mm elements.
Bedore I send my pump off to dieselmeken for 7.5 mm to help on increase low torque for my g wagen I would first like to adjust my alda. This made a huge difference on my old 617a so would like to give it a go!
But I have the round style alda instead of the more common flat style one. Mine is the same as in the picture attached
Question is how do I adjust one of these, can i screw out the set screw or should I shim it up a bit, can this even be done?
Thanks for all advice
Richard
if u want the alda to stop restricting , remove the screw out, all the way out is the same as remove the device.
regards
FD,
Powered by tractor fuel
he he he , alda on those pumps dont increase any fuel. they limit fuel untill boost is present. but irespetive of that the pump will deliver almost the same amount of fuel.
if u want the alda to stop restricting , remove the screw out, all the way out is the same as remove the device.
regards
FD,
Powered by tractor fuel
Last weekend my hydraulic pump broke off its mountings so that means I need to dissassemble the whole left side of the car to get to it and weld it back. As I am there anyway it will give me acces to the pump. And as I going on another trip in a few weeks I cant get the pump to dieselmeken in time.
Just looking for a bit more oomph from standstill for the mountains in Croatie!
As you can see quite busy under my hood
Thank you for your replies, I didn't explain my intentions very well.
Last weekend my hydraulic pump broke off its mountings so that means I need to dissassemble the whole left side of the car to get to it and weld it back. As I am there anyway it will give me acces to the pump. And as I going on another trip in a few weeks I cant get the pump to dieselmeken in time.
Just looking for a bit more oomph from standstill for the mountains in Croatie!
As you can see quite busy under my hood
2 Guest(s)
2 Guest(s)