Should I put HX40 and 7.5mm for everyday use?

STD Tuning Engine Should I put HX40 and 7.5mm for everyday use?

View a Printable Version

0 Vote(s) - 0 Average

deviance

HE351VE

88

07-09-2015, 09:48 AM #1

Hey guys!

My engine is now om606 7mm and KKK K27 It spool about 3500-4000 with only 1.3 bar (no smoke after that).

Should i put HX40 and 7.5mm for everyday use or that's too big for it? 4000+ spool?

Thank You!

deviance

07-09-2015, 09:48 AM #1

TurboTim

Holset

457

07-09-2015, 10:33 AM #2

Powerband will be 4500 and up. The power will be good but it is a compromise of losing low end. I have a 300SDL and pull a trailer a lot and I am having to rev the hell out of it to get any usable power going up hills or I am just rolling coal.

87 300SDL OM606 swapped HE351VE 722.633 swapped, Crower cams, KM valvesprings
76 300TD custom lots of stuff
06 Mercedes CL65 AMG 619 WHP, http://TurboTims.com

TurboTim

07-09-2015, 10:33 AM #2

87 300SDL OM606 swapped HE351VE 722.633 swapped, Crower cams, KM valvesprings
76 300TD custom lots of stuff
06 Mercedes CL65 AMG 619 WHP, http://TurboTims.com

deviance

HE351VE

88

07-10-2015, 06:21 AM #3

maybe hard to overtake cars? Smile

deviance

07-10-2015, 06:21 AM #3

maybe hard to overtake cars? Smile

erx

w202 om606

323

07-10-2015, 11:17 AM #4

I have om606 with 7,5mm diselmeken pump and hx40 with 16 housing. For everyday use it's not perfect but it's driveable. I have 1 bar boost at 3000rpm and 3bar at 4000rpm, it comes alive from 3500rpm. For everyday use I recommend smaller turbo because you really have to let rpm up to make it pull.