Timming chain strech in 605/6
Timming chain strech in 605/6
For those lucky fellas who have access to VIS tool , could u be nice and send me some info about chain strech on the 4 valve engines....
I seems all people i know open na eye brow when we start talking about the chain....
Regards
FD,
Powered by tractor fuel
Hello fine people,
For those lucky fellas who have access to VIS tool , could u be nice and send me some info about chain strech on the 4 valve engines....
I seems all people i know open na eye brow when we start talking about the chain....
Regards
FD,
Powered by tractor fuel
-------------------------------------------------------------------------------------------------------------------------
Ex: 525tds 130kW, C250TD 160kW, E320CDI 200kW, ML400CDI 230kW, A6 R5TDI 130kW
Now: Q7 V8TDI 240kW, 320d 150kW, 335d 210kW
If I recall correctly 5° is due replacement. I checked some engines well over 500 000km and stretch was 2-3° so it would not bother me much.
-------------------------------------------------------------------------------------------------------------------------
Ex: 525tds 130kW, C250TD 160kW, E320CDI 200kW, ML400CDI 230kW, A6 R5TDI 130kW
Now: Q7 V8TDI 240kW, 320d 150kW, 335d 210kW
Maybe u´re right , but what i really need is the manufacturer info , cause last time i checked it was about 5º , but i never seen or read about the procedure, on how to do it, and i not even talk about valve opening..... numbers
info of MB would be much apreciated....
regards
FD,
Powered by tractor fuel
Hy ,
Maybe u´re right , but what i really need is the manufacturer info , cause last time i checked it was about 5º , but i never seen or read about the procedure, on how to do it, and i not even talk about valve opening..... numbers
info of MB would be much apreciated....
regards
FD,
Powered by tractor fuel
-------------------------------------------------------------------------------------------------------------------------
Ex: 525tds 130kW, C250TD 160kW, E320CDI 200kW, ML400CDI 230kW, A6 R5TDI 130kW
Now: Q7 V8TDI 240kW, 320d 150kW, 335d 210kW
You do it simple, rotate engine before TDC, take off valve cover and then put 6mm pin into the hole in camshaft bearing. Rotate crank until your pin slides into camshaft sprocket. Then you read degrees on crankshaft pulley, that is your stretch.
-------------------------------------------------------------------------------------------------------------------------
Ex: 525tds 130kW, C250TD 160kW, E320CDI 200kW, ML400CDI 230kW, A6 R5TDI 130kW
Now: Q7 V8TDI 240kW, 320d 150kW, 335d 210kW
thing is the other info they talk in the work cards , thats what i´m after .... people say 3 to 5 degrees is good! ok i know that too experience...
what about valve timing , maybe is not so bad ... daddad.
i´m really interested in the work card
thanks
FD,
Powered by tractor fuel
Hy starynovy, that is more less common sense,
thing is the other info they talk in the work cards , thats what i´m after .... people say 3 to 5 degrees is good! ok i know that too experience...
what about valve timing , maybe is not so bad ... daddad.
i´m really interested in the work card
thanks
FD,
Powered by tractor fuel
Dont know man, BMW prechamber unit starts to slap valves at some 7°, and noticeably looses bottom end power with each degree beyond 3°.
-------------------------------------------------------------------------------------------------------------------------
Ex: 525tds 130kW, C250TD 160kW, E320CDI 200kW, ML400CDI 230kW, A6 R5TDI 130kW
Now: Q7 V8TDI 240kW, 320d 150kW, 335d 210kW
Well it sounded to me like you wre asking how to.. Dont know man, BMW prechamber unit starts to slap valves at some 7°, and noticeably looses bottom end power with each degree beyond 3°.
-------------------------------------------------------------------------------------------------------------------------
Ex: 525tds 130kW, C250TD 160kW, E320CDI 200kW, ML400CDI 230kW, A6 R5TDI 130kW
Now: Q7 V8TDI 240kW, 320d 150kW, 335d 210kW
hope some member can help me with that.
timing chain at MB store over here are 192€ plus 23%VAT.
maybe u want to sell me one
from there...
FD,
Powered by tractor fuel
thanks , but u see the BMW case!!! when i´m reving my 605 at 6k what maters is just a small valve float !!! and ddisaster strokes
hope some member can help me with that.
timing chain at MB store over here are 192€ plus 23%VAT.
maybe u want to sell me one from there...
FD,
Powered by tractor fuel
2 Guest(s)
2 Guest(s)