Electric fuel pump issues
Electric fuel pump issues
Duncansport
01-09-2016, 08:58 PM #2Bosch 044 is your best bet. Need 2.5-3 bar fuel pressure. The vane pumps die quickly when pumping diesel
(01-10-2016, 08:01 AM)Frank606 Hi Duncan
When using 044 pump do you need to fit a pressure reg to the system
As a precaution not to blow off fuel hoses
Thanks
yep, one after the pump. a basic 3bar will do.
Duncansport
01-10-2016, 07:37 PM #6(01-10-2016, 08:01 AM)Frank606 Hi Duncan
When using 044 pump do you need to fit a pressure reg to the system
As a precaution not to blow off fuel hoses
Thanks
yep, one after the pump. a basic 3bar will do.
---
W639 Vito OM606 + 722.6 STD - in progress
Current progress: engine in, gearbox in, bumper bar modified to accept w210 radiator, audi electric fan, very tight squeeze, interior stripped out ready for new seats (w211) and custom dash with w211 clocks controlled by arduino with split fuel gauge covering main tank and auxiliary for Veg Oil ...
- DSL1 ECU for Electronic OM606 Pump (currently fitting wiring)
Next; 722.6 Controller, HX40 with homemade manifold, Air-to-water intercooler, homemade exhaust, MOT.... One day!
What are in tank CDI lift pumps like? I haven't taken mine out of Vito to have a look, but I do recall 3bar mentioned. No.idea if regulated by high pressure pump return or in the lift pump. They are easy to come by in my local scrappy. But obviously a pain to fit to a tank without the large opening that many modern plastic tanks have. Hmm anyone know how they work?
---
W639 Vito OM606 + 722.6 STD - in progress
Current progress: engine in, gearbox in, bumper bar modified to accept w210 radiator, audi electric fan, very tight squeeze, interior stripped out ready for new seats (w211) and custom dash with w211 clocks controlled by arduino with split fuel gauge covering main tank and auxiliary for Veg Oil ...
- DSL1 ECU for Electronic OM606 Pump (currently fitting wiring)
Next; 722.6 Controller, HX40 with homemade manifold, Air-to-water intercooler, homemade exhaust, MOT.... One day!
http://www.ebay.co.uk/itm/BMW-E46-E39-E5...SwZG9WkhnY
Installed:
OM606/722.6, big IC, W220 brakes.
Planned:
DIY manifold, compound, 722.6 controller, built IP.
[i]Less rust.. [/i]
I'm installing an OEM BMW pump, it looks like a slender 044 and cost about 20 bucks.
http://www.ebay.co.uk/itm/BMW-E46-E39-E5...SwZG9WkhnY
Installed:
OM606/722.6, big IC, W220 brakes.
Planned:
DIY manifold, compound, 722.6 controller, built IP.
[i]Less rust.. [/i]
http://www.highflowfuel.com/i-10383995-w...Hwodx50MnQ
50harleyrider
01-14-2016, 11:57 AM #10These are supposed to be good pumps if you want external inline:
http://www.highflowfuel.com/i-10383995-w...Hwodx50MnQ
6 Guest(s)
6 Guest(s)