STD Other Open Cheap digital oscilloscope.

Cheap digital oscilloscope.

Cheap digital oscilloscope.

 
  • 0 Vote(s) - 0 Average
 
winmutt
bitbanger

3,468
10-20-2009, 11:05 AM #1
I found this puppy for cheap :

http://www.seeedstudio.com/depot/digital...p-514.html

$50 made by JYE tech.

[Image: 3954403765_7f2dd2069d.jpg]

1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42
winmutt
10-20-2009, 11:05 AM #1

I found this puppy for cheap :

http://www.seeedstudio.com/depot/digital...p-514.html

$50 made by JYE tech.

[Image: 3954403765_7f2dd2069d.jpg]


1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42

E300TSC
Turbo-Supercharged

321
11-04-2009, 01:42 PM #2
Wow, that's nice! I've been thinking I should get something to diagnose and trace the various signals coming fromthe ECU onthe car...

I ordered the kit from these people:

www.nkcelectronics.com

Same stuff and prices just not the $40 to ship that little thing from China!
This post was last modified: 11-04-2009, 02:37 PM by E300TSC.
E300TSC
11-04-2009, 01:42 PM #2

Wow, that's nice! I've been thinking I should get something to diagnose and trace the various signals coming fromthe ECU onthe car...

I ordered the kit from these people:

www.nkcelectronics.com

Same stuff and prices just not the $40 to ship that little thing from China!

winmutt
bitbanger

3,468
11-05-2009, 04:16 PM #3
Premade? Got a direct link?

1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42
winmutt
11-05-2009, 04:16 PM #3

Premade? Got a direct link?


1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42

E300TSC
Turbo-Supercharged

321
11-05-2009, 06:59 PM #4
I bought the kit for $35 + $4 for shipping.

Kit - http://www.nkcelectronics.com/digital-st...y-kit.html

Built - http://www.nkcelectronics.com/digital-st...-cost.html
E300TSC
11-05-2009, 06:59 PM #4

I bought the kit for $35 + $4 for shipping.

Kit - http://www.nkcelectronics.com/digital-st...y-kit.html

Built - http://www.nkcelectronics.com/digital-st...-cost.html

E300TSC
Turbo-Supercharged

321
11-09-2009, 08:33 PM #5
Someday...

[Image: PB050087.jpg]

This pile of parts will be a complete oscilloscope... Smile
E300TSC
11-09-2009, 08:33 PM #5

Someday...

[Image: PB050087.jpg]

This pile of parts will be a complete oscilloscope... Smile

300SD81
GT2559V

187
11-09-2009, 08:59 PM #6
(11-09-2009, 08:33 PM)E300TSC Someday...

[Image: PB050087.jpg]

This pile of parts will be a complete oscilloscope... Smile

haha, you have the FUN part already done for you! All the SMDs are pre-soldered... Wink

I'll solder that stuff together for free if anyone wants to pay shipping both ways, although if you want me to do it, get the one without the SMDs soldered..
This post was last modified: 11-09-2009, 09:10 PM by 300SD81.

Ich liebe meine Autos!

1981 Mercedes-Benz 300SD | 156K Miles | 2nd Owner | EGR Disabled [Removal Pending] | ALDA Removed | Straight Pipes | GT2256V??? | Laser Interceptor | Engine swap over summer, hopefully with GT2256V attached...

1981 Mercedes-Benz 300SD | Odo Stopped at 160K (at least 50K more) | EGR Disabled | ALDA All The Way Out | Straight pipes | FM-870 Remote Start Alarm System | B100 Biodiesel | AC Fixed x2 | Trunk crushed in Sad | Retired to garage.

Excessive speeding? It ain't excessive till I redline!
300SD81
11-09-2009, 08:59 PM #6

(11-09-2009, 08:33 PM)E300TSC Someday...

[Image: PB050087.jpg]

This pile of parts will be a complete oscilloscope... Smile

haha, you have the FUN part already done for you! All the SMDs are pre-soldered... Wink

I'll solder that stuff together for free if anyone wants to pay shipping both ways, although if you want me to do it, get the one without the SMDs soldered..


Ich liebe meine Autos!

1981 Mercedes-Benz 300SD | 156K Miles | 2nd Owner | EGR Disabled [Removal Pending] | ALDA Removed | Straight Pipes | GT2256V??? | Laser Interceptor | Engine swap over summer, hopefully with GT2256V attached...

1981 Mercedes-Benz 300SD | Odo Stopped at 160K (at least 50K more) | EGR Disabled | ALDA All The Way Out | Straight pipes | FM-870 Remote Start Alarm System | B100 Biodiesel | AC Fixed x2 | Trunk crushed in Sad | Retired to garage.

Excessive speeding? It ain't excessive till I redline!

E300TSC
Turbo-Supercharged

321
11-12-2009, 12:45 PM #7
Well... Sad to say that as perfectly as I followed the Chinese instructions and as carefully as I placed and soldered every connection and every component, it will not boot up... Sad

There are several release notes but sometimes the language is like a double negative and it's hard to figure out what they're saying...

I did notice that some of the components were getting kind of warm so maybe one of the capacitors that I was supposed to reverse got reversed twice.

Bummer...
E300TSC
11-12-2009, 12:45 PM #7

Well... Sad to say that as perfectly as I followed the Chinese instructions and as carefully as I placed and soldered every connection and every component, it will not boot up... Sad

There are several release notes but sometimes the language is like a double negative and it's hard to figure out what they're saying...

I did notice that some of the components were getting kind of warm so maybe one of the capacitors that I was supposed to reverse got reversed twice.

Bummer...

winmutt
bitbanger

3,468
11-12-2009, 04:54 PM #8
Now you know why I wanted to buy it preassembled. U email tech support yet?

1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42
winmutt
11-12-2009, 04:54 PM #8

Now you know why I wanted to buy it preassembled. U email tech support yet?


1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42

winmutt
bitbanger

3,468
12-07-2009, 03:15 PM #9
I got mine in the mail this weekend. Rand duct tape around the sides to seal up the places where fingers might go and it works pretty good. The sensor input plug (RCA) is wiggly or something so it doesnt work 100% but when it does it certainly does the job. As I mentioned in the vnt controller thread, my arduino was outputting PWM at 7.1ms..

1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42
winmutt
12-07-2009, 03:15 PM #9

I got mine in the mail this weekend. Rand duct tape around the sides to seal up the places where fingers might go and it works pretty good. The sensor input plug (RCA) is wiggly or something so it doesnt work 100% but when it does it certainly does the job. As I mentioned in the vnt controller thread, my arduino was outputting PWM at 7.1ms..


1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42

E300TSC
Turbo-Supercharged

321
04-19-2010, 12:51 PM #10
Fixed mine. Improved the solder joints connecting the diaplay board to the main board and it's good to go now.

1998 MB E300 - 194,000 miles. Current/future mods: 7.5mm pump elements, Holset HX40 Turbo feeding Eaton M90 supercharger through custom fabbed intake system. Aeroturbine muffler, scratch-built 4" stainless exhaust. EGR eliminated, ECM recalibrated, modified rack position feedback circuit. Porterfield RS brake pads, Bilstein sport shocks, VDO EGT, oil and boost gauges.

2000 Ford F250 - 150,000 miles. Current/future mods: DP Tuner 3 map chip, scratch-built high flow intake, high output IDM, open circuit fuel system, ball bearing turbo, South Bend full metal clutch, slotted and drilled rotors. Autometer Sport Comp EGT and boost gauges.
E300TSC
04-19-2010, 12:51 PM #10

Fixed mine. Improved the solder joints connecting the diaplay board to the main board and it's good to go now.


1998 MB E300 - 194,000 miles. Current/future mods: 7.5mm pump elements, Holset HX40 Turbo feeding Eaton M90 supercharger through custom fabbed intake system. Aeroturbine muffler, scratch-built 4" stainless exhaust. EGR eliminated, ECM recalibrated, modified rack position feedback circuit. Porterfield RS brake pads, Bilstein sport shocks, VDO EGT, oil and boost gauges.

2000 Ford F250 - 150,000 miles. Current/future mods: DP Tuner 3 map chip, scratch-built high flow intake, high output IDM, open circuit fuel system, ball bearing turbo, South Bend full metal clutch, slotted and drilled rotors. Autometer Sport Comp EGT and boost gauges.

winmutt
bitbanger

3,468
03-24-2011, 02:04 PM #11
Doubt this will be as cheap but god is it sexy!

http://iteadstudio.com/copied/ds203-mini...ction-now/

[Image: 203v2.611_thumb.jpg]


1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42
winmutt
03-24-2011, 02:04 PM #11

Doubt this will be as cheap but god is it sexy!

http://iteadstudio.com/copied/ds203-mini...ction-now/

[Image: 203v2.611_thumb.jpg]


1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42

stan
Holset

328
03-24-2011, 02:12 PM #12
you realize if you want a small cheap slow scope you could just get a dso nano and have it working on arrival Tongue
stan
03-24-2011, 02:12 PM #12

you realize if you want a small cheap slow scope you could just get a dso nano and have it working on arrival Tongue

 
  • 0 Vote(s) - 0 Average
Users browsing this thread:
 3 Guest(s)
Users browsing this thread:
 3 Guest(s)