STD Tuning Engine 314 nozzles

314 nozzles

314 nozzles

 
  • 0 Vote(s) - 0 Average
 
blankman812
Naturally-aspirated

15
09-24-2016, 04:06 PM #1
I put a set of 314 nozzles in my 616 and it cleaned up the idle but has seemed to have lost power my stock injectors were 240 nozzles I was led to believe the 314s were approx 15% over duty am I confused or missing something here
blankman812
09-24-2016, 04:06 PM #1

I put a set of 314 nozzles in my 616 and it cleaned up the idle but has seemed to have lost power my stock injectors were 240 nozzles I was led to believe the 314s were approx 15% over duty am I confused or missing something here

NZScott
HX30W 73/44mm

398
09-24-2016, 05:33 PM #2
Sorry mate, 314s were the later nozzles, 315s are for a non-MB engine and are meant to flow more.

But don't forget in an IDI the injector flow is largely irrelevant. If your 616 is NA still then I doubt you would gain all that much anyway.

But hey, new nozzles of any type will make an engine run better Smile


1978 300D, 373,000km... OM617.912 with a Holset HX30W, 7.5mm IP, 711.113 5 speed (project car, 7 years off the road and counting ;/)
1977 250 270,000km (parts car)
1977 300D (ex 280) 500,000km

1981 240D 498,000
1975 HJ45 ???,000
2001 2.8TD Rodeo 4x2 - 456,000 - DD




NZScott
09-24-2016, 05:33 PM #2

Sorry mate, 314s were the later nozzles, 315s are for a non-MB engine and are meant to flow more.

But don't forget in an IDI the injector flow is largely irrelevant. If your 616 is NA still then I doubt you would gain all that much anyway.

But hey, new nozzles of any type will make an engine run better Smile



1978 300D, 373,000km... OM617.912 with a Holset HX30W, 7.5mm IP, 711.113 5 speed (project car, 7 years off the road and counting ;/)
1977 250 270,000km (parts car)
1977 300D (ex 280) 500,000km

1981 240D 498,000
1975 HJ45 ???,000
2001 2.8TD Rodeo 4x2 - 456,000 - DD




blankman812
Naturally-aspirated

15
09-24-2016, 05:48 PM #3
It has a kko3 turbo and I'm working on the pump now it is intercooled and I'm ready for more fuel
blankman812
09-24-2016, 05:48 PM #3

It has a kko3 turbo and I'm working on the pump now it is intercooled and I'm ready for more fuel

NZScott
HX30W 73/44mm

398
09-24-2016, 08:06 PM #4
Sounds like you're pretty well set up then. Enjoy your new nozzles Wink


1978 300D, 373,000km... OM617.912 with a Holset HX30W, 7.5mm IP, 711.113 5 speed (project car, 7 years off the road and counting ;/)
1977 250 270,000km (parts car)
1977 300D (ex 280) 500,000km

1981 240D 498,000
1975 HJ45 ???,000
2001 2.8TD Rodeo 4x2 - 456,000 - DD




NZScott
09-24-2016, 08:06 PM #4

Sounds like you're pretty well set up then. Enjoy your new nozzles Wink



1978 300D, 373,000km... OM617.912 with a Holset HX30W, 7.5mm IP, 711.113 5 speed (project car, 7 years off the road and counting ;/)
1977 250 270,000km (parts car)
1977 300D (ex 280) 500,000km

1981 240D 498,000
1975 HJ45 ???,000
2001 2.8TD Rodeo 4x2 - 456,000 - DD




blankman812
Naturally-aspirated

15
09-24-2016, 09:03 PM #5
The new nozzles didn't work I need larger nozzles....
blankman812
09-24-2016, 09:03 PM #5

The new nozzles didn't work I need larger nozzles....

NZScott
HX30W 73/44mm

398
09-25-2016, 01:56 AM #6
If the engine runs they're working Tongue

You don't need bigger nozzles. People get 500+ hp from 606s on 314s so...


1978 300D, 373,000km... OM617.912 with a Holset HX30W, 7.5mm IP, 711.113 5 speed (project car, 7 years off the road and counting ;/)
1977 250 270,000km (parts car)
1977 300D (ex 280) 500,000km

1981 240D 498,000
1975 HJ45 ???,000
2001 2.8TD Rodeo 4x2 - 456,000 - DD




NZScott
09-25-2016, 01:56 AM #6

If the engine runs they're working Tongue

You don't need bigger nozzles. People get 500+ hp from 606s on 314s so...



1978 300D, 373,000km... OM617.912 with a Holset HX30W, 7.5mm IP, 711.113 5 speed (project car, 7 years off the road and counting ;/)
1977 250 270,000km (parts car)
1977 300D (ex 280) 500,000km

1981 240D 498,000
1975 HJ45 ???,000
2001 2.8TD Rodeo 4x2 - 456,000 - DD




Greazzer
Superturbo

1,278
09-25-2016, 10:56 AM #7
The #315s are the known drop in replacements which flow around 15% more fuel. The #314s, #265s, and #261s flow around the same amount of fuel, with tiny differences in which highly unlikely any person would ever know any difference.

Ninth Year Anniversary with STD on 1-9-2020

visit:  www.dieselfuelinjector.guru

Project 2018: Really get the car finished -- Turbo OM617 greater than 175 MPH goal.

RED W123 - left Germany as 240D in 1982.  Full AMG body kit less rear apron, 2:65LSD, five speed Getrag 717.400, manual steering, read leather interior, manual brake conversion, electric water pump (EWP), and a bunch of other goodies ...
Greazzer
09-25-2016, 10:56 AM #7

The #315s are the known drop in replacements which flow around 15% more fuel. The #314s, #265s, and #261s flow around the same amount of fuel, with tiny differences in which highly unlikely any person would ever know any difference.


Ninth Year Anniversary with STD on 1-9-2020

visit:  www.dieselfuelinjector.guru

Project 2018: Really get the car finished -- Turbo OM617 greater than 175 MPH goal.

RED W123 - left Germany as 240D in 1982.  Full AMG body kit less rear apron, 2:65LSD, five speed Getrag 717.400, manual steering, read leather interior, manual brake conversion, electric water pump (EWP), and a bunch of other goodies ...

blankman812
Naturally-aspirated

15
09-25-2016, 12:44 PM #8
I see you all aren't reading what I am trying to say I went to the 314 form a 240 and I have lost power something is wrong or am I missing something the factory injector created more power it was a little snooker also the 314 start up clean and stay clean and my egts are way lower it feels like I'm only 3/4 throttle now
blankman812
09-25-2016, 12:44 PM #8

I see you all aren't reading what I am trying to say I went to the 314 form a 240 and I have lost power something is wrong or am I missing something the factory injector created more power it was a little snooker also the 314 start up clean and stay clean and my egts are way lower it feels like I'm only 3/4 throttle now

Greazzer
Superturbo

1,278
09-25-2016, 08:04 PM #9
You should not have lost any power. Something is apparently not "right". Did you pop test them before installing them?

Ninth Year Anniversary with STD on 1-9-2020

visit:  www.dieselfuelinjector.guru

Project 2018: Really get the car finished -- Turbo OM617 greater than 175 MPH goal.

RED W123 - left Germany as 240D in 1982.  Full AMG body kit less rear apron, 2:65LSD, five speed Getrag 717.400, manual steering, read leather interior, manual brake conversion, electric water pump (EWP), and a bunch of other goodies ...
Greazzer
09-25-2016, 08:04 PM #9

You should not have lost any power. Something is apparently not "right". Did you pop test them before installing them?


Ninth Year Anniversary with STD on 1-9-2020

visit:  www.dieselfuelinjector.guru

Project 2018: Really get the car finished -- Turbo OM617 greater than 175 MPH goal.

RED W123 - left Germany as 240D in 1982.  Full AMG body kit less rear apron, 2:65LSD, five speed Getrag 717.400, manual steering, read leather interior, manual brake conversion, electric water pump (EWP), and a bunch of other goodies ...

 
  • 0 Vote(s) - 0 Average
Users browsing this thread:
 2 Guest(s)
Users browsing this thread:
 2 Guest(s)