Ignition switch with vacuum switch into w202

STD Tuning Engine Ignition switch with vacuum switch into w202

View a Printable Version

0 Vote(s) - 0 Average

addi.bigg

OM605; 7,5mm elements

94

01-17-2017, 08:33 AM #1

Fellas,

I'm keep searching but couldn't find a reliable source for ignition switch that contains vacuum switch, and bolt-on into a w202 c250TD (no immobiliser).
I've heard here that 2.0D 55kw is bolt-on but I couldn't find one here.
Anyone could make a comparison of W124/W190 2.0D ignition switch vs. w202 2.5TD, so I could have a proof whether I can buy confidently any of those with 2.0D

Thanks!
Ádám

addi.bigg

01-17-2017, 08:33 AM #1

Petar

7.5mm M pump

459

01-17-2017, 01:34 PM #2

You don't need it, use a vacuum solenoid wired into the ignition to shut down the engine. Worked reliably for me for years on my W123 (It was gas engined before, and I was too lazy to swap the ignition switch)

Petar

01-17-2017, 01:34 PM #2

maxypriest

Holset

287

01-18-2017, 07:22 AM #3

I have the same set up as Petar - works perfectly.

W124 om606 HX40 finished and it's a beauty 450bhp/456ft-lbs

maxypriest

01-18-2017, 07:22 AM #3

I have the same set up as Petar - works perfectly.

W124 om606 HX40 finished and it's a beauty 450bhp/456ft-lbs

Sultzi

GT2256V

102

01-21-2017, 03:59 AM #4

Did same thing than Petar (also in 123 old gasoline converted to om606). Just took one solenoid from 124 and used that to kill the engine, simple and works like a glove.

Sultzi

01-21-2017, 03:59 AM #4

Did same thing than Petar (also in 123 old gasoline converted to om606). Just took one solenoid from 124 and used that to kill the engine, simple and works like a glove.

View a Printable Version

0 Vote(s) - 0 Average

Users browsing this thread:
1 Guest(s)