Turbo upgrade
Turbo upgrade
07-02-2009, 03:48 AM
#2
ForcedInduction
07-02-2009, 03:48 AM
#2
You have a TB251 (T25). A T3 will be an upgrade but it won't fit the T25 flange. A lot of the VNT turbos VW uses in europe have a T25 flange.
07-02-2009, 12:27 PM
#4
(07-02-2009, 10:34 AM)Motorhead Does anyone have the Map to the OM617 Air Research turbo?
The OM617 AirResearch turbo is a Garrett T3-45. It's map is available on the not2fast turbo calculator. Forced Induction has a link to a page that has all the OM617 specs plugged in to that calculator.
GREASY_BEAST
07-02-2009, 12:27 PM #4(07-02-2009, 10:34 AM)Motorhead Does anyone have the Map to the OM617 Air Research turbo?
The OM617 AirResearch turbo is a Garrett T3-45. It's map is available on the not2fast turbo calculator. Forced Induction has a link to a page that has all the OM617 specs plugged in to that calculator.
07-02-2009, 01:58 PM
#5
(07-02-2009, 12:27 PM)GREASY_BEASTCool, I will plug the #'s in.(07-02-2009, 10:34 AM)Motorhead Does anyone have the Map to the OM617 Air Research turbo?
The OM617 AirResearch turbo is a Garrett T3-45. It's map is available on the not2fast turbo calculator. Forced Induction has a link to a page that has all the OM617 specs plugged in to that calculator.
(07-02-2009, 12:27 PM)GREASY_BEASTCool, I will plug the #'s in.(07-02-2009, 10:34 AM)Motorhead Does anyone have the Map to the OM617 Air Research turbo?
The OM617 AirResearch turbo is a Garrett T3-45. It's map is available on the not2fast turbo calculator. Forced Induction has a link to a page that has all the OM617 specs plugged in to that calculator.
07-02-2009, 03:25 PM
#6
Note: Its set for Denver altitude.
ForcedInduction
07-02-2009, 03:25 PM
#6
http://www.not2fast.com/turbo/glossary/t...utyCycle=0
Note: Its set for Denver altitude.
07-03-2009, 09:07 PM
#10
would it yield more power too even though my Bosch pump really cant put out much more than it is now...?
1976 W115 medium red/tan 240D (undergoing M117 heart transplant)
1989 BMW E30 327iC SETA 5MT
1987 white/black 190D Turbo Diesel - Recaro 16V seats, Monoblocks, 11PSI.
2009 white/black C63 ///AMG
1987 BMW E30 325E M50B25NV 24V swap 5MT. 5 lug.
1999 white/grey ML430
1991 BMW E30 318i 5MT (Beater)
1990 BMW E34 525i 5MT
1997 red/black/black SL600
if I were to get a new T-25 flange turbo, would that decrease spool time? what are the benefits of a new turbo over the stock on the OM602.961?
would it yield more power too even though my Bosch pump really cant put out much more than it is now...?
1976 W115 medium red/tan 240D (undergoing M117 heart transplant)
1989 BMW E30 327iC SETA 5MT
1987 white/black 190D Turbo Diesel - Recaro 16V seats, Monoblocks, 11PSI.
2009 white/black C63 ///AMG
1987 BMW E30 325E M50B25NV 24V swap 5MT. 5 lug.
1999 white/grey ML430
1991 BMW E30 318i 5MT (Beater)
1990 BMW E34 525i 5MT
1997 red/black/black SL600
07-04-2009, 04:50 AM
#11
http://cgi.ebay.com/ws/eBayISAPI.dll?Vie...0441976374
ForcedInduction
07-04-2009, 04:50 AM
#11
This HX25 would be a good upgrade, about equivalent of a T3 but it will flow more air.
http://cgi.ebay.com/ws/eBayISAPI.dll?Vie...0441976374
07-04-2009, 01:35 PM
#13
i take it the HX25 spools quicker than the stock turbo, but can the Injection Pumps boost compensator make use of a few extra PSI?
1976 W115 medium red/tan 240D (undergoing M117 heart transplant)
1989 BMW E30 327iC SETA 5MT
1987 white/black 190D Turbo Diesel - Recaro 16V seats, Monoblocks, 11PSI.
2009 white/black C63 ///AMG
1987 BMW E30 325E M50B25NV 24V swap 5MT. 5 lug.
1999 white/grey ML430
1991 BMW E30 318i 5MT (Beater)
1990 BMW E34 525i 5MT
1997 red/black/black SL600
aside from bolting up a new turbo, how does one deal with oil and or coolant lines?
i take it the HX25 spools quicker than the stock turbo, but can the Injection Pumps boost compensator make use of a few extra PSI?
1976 W115 medium red/tan 240D (undergoing M117 heart transplant)
1989 BMW E30 327iC SETA 5MT
1987 white/black 190D Turbo Diesel - Recaro 16V seats, Monoblocks, 11PSI.
2009 white/black C63 ///AMG
1987 BMW E30 325E M50B25NV 24V swap 5MT. 5 lug.
1999 white/grey ML430
1991 BMW E30 318i 5MT (Beater)
1990 BMW E34 525i 5MT
1997 red/black/black SL600
10-20-2009, 10:17 PM
#15
meareweird
10-20-2009, 10:17 PM #15I have the same car(190D turbodiesel) and was wondering some of these same questions. Does anyone have the stock turbos flow map?
10-29-2009, 05:01 PM
#18
(10-27-2009, 11:47 PM)meareweird i did the swap myself
happen to take any pics?
1976 W115 medium red/tan 240D (undergoing M117 heart transplant)
1989 BMW E30 327iC SETA 5MT
1987 white/black 190D Turbo Diesel - Recaro 16V seats, Monoblocks, 11PSI.
2009 white/black C63 ///AMG
1987 BMW E30 325E M50B25NV 24V swap 5MT. 5 lug.
1999 white/grey ML430
1991 BMW E30 318i 5MT (Beater)
1990 BMW E34 525i 5MT
1997 red/black/black SL600
(10-27-2009, 11:47 PM)meareweird i did the swap myself
happen to take any pics?
1976 W115 medium red/tan 240D (undergoing M117 heart transplant)
1989 BMW E30 327iC SETA 5MT
1987 white/black 190D Turbo Diesel - Recaro 16V seats, Monoblocks, 11PSI.
2009 white/black C63 ///AMG
1987 BMW E30 325E M50B25NV 24V swap 5MT. 5 lug.
1999 white/grey ML430
1991 BMW E30 318i 5MT (Beater)
1990 BMW E34 525i 5MT
1997 red/black/black SL600
10-29-2009, 11:34 PM
#20
meareweird
10-29-2009, 11:34 PM #20no i didnt sorry i really should have said i am doing the swap myself i will be putting it in in the next few days though and then inspection maybe ill take some pics of what i have done so far
10-30-2009, 11:02 PM
#21
I have a 5-speed and all the parts sitting in my shop, and that dim witted 4-speed auto still crippling the 602.
1976 W115 medium red/tan 240D (undergoing M117 heart transplant)
1989 BMW E30 327iC SETA 5MT
1987 white/black 190D Turbo Diesel - Recaro 16V seats, Monoblocks, 11PSI.
2009 white/black C63 ///AMG
1987 BMW E30 325E M50B25NV 24V swap 5MT. 5 lug.
1999 white/grey ML430
1991 BMW E30 318i 5MT (Beater)
1990 BMW E34 525i 5MT
1997 red/black/black SL600
anything would help
I have a 5-speed and all the parts sitting in my shop, and that dim witted 4-speed auto still crippling the 602.
1976 W115 medium red/tan 240D (undergoing M117 heart transplant)
1989 BMW E30 327iC SETA 5MT
1987 white/black 190D Turbo Diesel - Recaro 16V seats, Monoblocks, 11PSI.
2009 white/black C63 ///AMG
1987 BMW E30 325E M50B25NV 24V swap 5MT. 5 lug.
1999 white/grey ML430
1991 BMW E30 318i 5MT (Beater)
1990 BMW E34 525i 5MT
1997 red/black/black SL600
11-01-2009, 06:30 AM
#22
(10-30-2009, 11:02 PM)2.5-10 anything would help
I have a 5-speed and all the parts sitting in my shop, and that dim witted 4-speed auto still crippling the 602.
Since I have a 190d with the om602 turbo and already have a 5sp, can we keep on the topic and discuss the best (preferably bolt on) turbo
.Living in Europe as well
1992 Mercedes 190D 2.5 turbo 5sp manual. EGT+boost gauges. Boost controller set to ~14.5 psi. 1 1/4 turns on full load adjustment. LPG injection.
![[Image: 3803751914_8fdca63138_o.jpg]](http://farm4.static.flickr.com/3543/3803751914_8fdca63138_o.jpg)
(10-30-2009, 11:02 PM)2.5-10 anything would help
I have a 5-speed and all the parts sitting in my shop, and that dim witted 4-speed auto still crippling the 602.
Since I have a 190d with the om602 turbo and already have a 5sp, can we keep on the topic and discuss the best (preferably bolt on) turbo
.Living in Europe as well
1992 Mercedes 190D 2.5 turbo 5sp manual. EGT+boost gauges. Boost controller set to ~14.5 psi. 1 1/4 turns on full load adjustment. LPG injection.
11-01-2009, 04:57 PM
#23
I am indeed curious about the best turbo for the job.
seems like a stock late 90s DSM turbocharger should be a pretty good bet. T25 flange and they are properly cheap.
This post was last modified: 11-01-2009, 05:50 PM by 2.5-10.
1976 W115 medium red/tan 240D (undergoing M117 heart transplant)
1989 BMW E30 327iC SETA 5MT
1987 white/black 190D Turbo Diesel - Recaro 16V seats, Monoblocks, 11PSI.
2009 white/black C63 ///AMG
1987 BMW E30 325E M50B25NV 24V swap 5MT. 5 lug.
1999 white/grey ML430
1991 BMW E30 318i 5MT (Beater)
1990 BMW E34 525i 5MT
1997 red/black/black SL600
you and your factory manual transmission :p
I am indeed curious about the best turbo for the job.
seems like a stock late 90s DSM turbocharger should be a pretty good bet. T25 flange and they are properly cheap.
1976 W115 medium red/tan 240D (undergoing M117 heart transplant)
1989 BMW E30 327iC SETA 5MT
1987 white/black 190D Turbo Diesel - Recaro 16V seats, Monoblocks, 11PSI.
2009 white/black C63 ///AMG
1987 BMW E30 325E M50B25NV 24V swap 5MT. 5 lug.
1999 white/grey ML430
1991 BMW E30 318i 5MT (Beater)
1990 BMW E34 525i 5MT
1997 red/black/black SL600
11-03-2009, 04:20 AM
#24
(11-01-2009, 04:57 PM)2.5-10 you and your factory manual transmission :p
I am indeed curious about the best turbo for the job.
seems like a stock late 90s DSM turbocharger should be a pretty good bet. T25 flange and they are properly cheap.
Off - topic, people over here pay to convert their manuals to automatics
1992 Mercedes 190D 2.5 turbo 5sp manual. EGT+boost gauges. Boost controller set to ~14.5 psi. 1 1/4 turns on full load adjustment. LPG injection.
(11-01-2009, 04:57 PM)2.5-10 you and your factory manual transmission :p
I am indeed curious about the best turbo for the job.
seems like a stock late 90s DSM turbocharger should be a pretty good bet. T25 flange and they are properly cheap.
Off - topic, people over here pay to convert their manuals to automatics
1992 Mercedes 190D 2.5 turbo 5sp manual. EGT+boost gauges. Boost controller set to ~14.5 psi. 1 1/4 turns on full load adjustment. LPG injection.
11-03-2009, 11:45 AM
#25
1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
willbhere4u
11-03-2009, 11:45 AM #25great send over your 5spds and we will send over some auto's!!! lol
1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
11-03-2009, 03:43 PM
#27
1976 W115 medium red/tan 240D (undergoing M117 heart transplant)
1989 BMW E30 327iC SETA 5MT
1987 white/black 190D Turbo Diesel - Recaro 16V seats, Monoblocks, 11PSI.
2009 white/black C63 ///AMG
1987 BMW E30 325E M50B25NV 24V swap 5MT. 5 lug.
1999 white/grey ML430
1991 BMW E30 318i 5MT (Beater)
1990 BMW E34 525i 5MT
1997 red/black/black SL600
automatics suck, just sayin'
1976 W115 medium red/tan 240D (undergoing M117 heart transplant)
1989 BMW E30 327iC SETA 5MT
1987 white/black 190D Turbo Diesel - Recaro 16V seats, Monoblocks, 11PSI.
2009 white/black C63 ///AMG
1987 BMW E30 325E M50B25NV 24V swap 5MT. 5 lug.
1999 white/grey ML430
1991 BMW E30 318i 5MT (Beater)
1990 BMW E34 525i 5MT
1997 red/black/black SL600
11-20-2009, 09:00 PM
#30
(11-20-2009, 07:15 PM)Jtn190D Is the HX 25 turbo a direct fit for my car?
I believe that most of the the HX/HY25s are T3 flanged..although I have heard that sometimes they can be t25.
http://cgi.ebay.com/ebaymotors/HOLSET-HY...414aa653fc
Here's an HY25w. FI said this seller can be bad though; make sure you get some good pictures of the compressor wheel and turbine if you decide to get this one. The damaged blades might make it scrap depending on the severity.
This post was last modified: 11-20-2009, 09:03 PM by awsrock.
(11-20-2009, 07:15 PM)Jtn190D Is the HX 25 turbo a direct fit for my car?
I believe that most of the the HX/HY25s are T3 flanged..although I have heard that sometimes they can be t25.
http://cgi.ebay.com/ebaymotors/HOLSET-HY...414aa653fc
Here's an HY25w. FI said this seller can be bad though; make sure you get some good pictures of the compressor wheel and turbine if you decide to get this one. The damaged blades might make it scrap depending on the severity.
11-20-2009, 09:28 PM
#31
![[Image: DSC09730.JPG]](http://ohiotruckparts.us/p/DSC09730.JPG)
This post was last modified: 11-20-2009, 09:28 PM by ForcedInduction.
ForcedInduction
11-21-2009, 08:17 PM
#33
Dirt ingestion from a bad air filter or intake tubing seals.
11-21-2009, 10:36 PM
#34
If you don't want 20+ psi boost, there are many garretts which will bolt on to a T25 flange and cover the air flow requirements.
The whole bottom half of the Garrett GT range has T2/T25/T28 flanges, they are also far more compact than your average holset.
However, those looking for a turbo upgrade, should first ask themselves what they're looking for. Often their current turbo can just have it's wastegate tweaked for more boost or exhaust housing changed for bigger/smaller for more top end power or more low end torque.
IMO the holsets are best suited to those wanting high pressure ratios. If you want 20+ psi boost then they're a good place to be shopping.
If you don't want 20+ psi boost, there are many garretts which will bolt on to a T25 flange and cover the air flow requirements.
The whole bottom half of the Garrett GT range has T2/T25/T28 flanges, they are also far more compact than your average holset.
However, those looking for a turbo upgrade, should first ask themselves what they're looking for. Often their current turbo can just have it's wastegate tweaked for more boost or exhaust housing changed for bigger/smaller for more top end power or more low end torque.
11-22-2009, 01:51 AM
#35
they are also T25.
1976 W115 medium red/tan 240D (undergoing M117 heart transplant)
1989 BMW E30 327iC SETA 5MT
1987 white/black 190D Turbo Diesel - Recaro 16V seats, Monoblocks, 11PSI.
2009 white/black C63 ///AMG
1987 BMW E30 325E M50B25NV 24V swap 5MT. 5 lug.
1999 white/grey ML430
1991 BMW E30 318i 5MT (Beater)
1990 BMW E34 525i 5MT
1997 red/black/black SL600
mid 90's DSM turbos are cheap, even ones in perfect shape.
they are also T25.
1976 W115 medium red/tan 240D (undergoing M117 heart transplant)
1989 BMW E30 327iC SETA 5MT
1987 white/black 190D Turbo Diesel - Recaro 16V seats, Monoblocks, 11PSI.
2009 white/black C63 ///AMG
1987 BMW E30 325E M50B25NV 24V swap 5MT. 5 lug.
1999 white/grey ML430
1991 BMW E30 318i 5MT (Beater)
1990 BMW E34 525i 5MT
1997 red/black/black SL600
11-23-2009, 08:47 AM
#36
Thanks guys, im looking for more low end power my car does not really have much power intil about 2500rpm i was thinking a turbo upgrade would help maybe with low end power not sure maybe i should mess around with IP? any good way to increase power with out it costing major money? if i do a five speed conversion i would like lower end power becouse what i read its geared a lot different. any thoughts?
11-23-2009, 11:14 AM
#37
you will never get boost at 1,000rpm with these engines, its just not how they are.
1976 W115 medium red/tan 240D (undergoing M117 heart transplant)
1989 BMW E30 327iC SETA 5MT
1987 white/black 190D Turbo Diesel - Recaro 16V seats, Monoblocks, 11PSI.
2009 white/black C63 ///AMG
1987 BMW E30 325E M50B25NV 24V swap 5MT. 5 lug.
1999 white/grey ML430
1991 BMW E30 318i 5MT (Beater)
1990 BMW E34 525i 5MT
1997 red/black/black SL600
with a newer turbo, you can get it to spool quicker, but the biggest thing I have done to reduce spool time in my 190D turbo is swap out the airbox for a cone, and make the exhaust as free flowing as possible. I get boost at about 1,600rpm now..
you will never get boost at 1,000rpm with these engines, its just not how they are.
1976 W115 medium red/tan 240D (undergoing M117 heart transplant)
1989 BMW E30 327iC SETA 5MT
1987 white/black 190D Turbo Diesel - Recaro 16V seats, Monoblocks, 11PSI.
2009 white/black C63 ///AMG
1987 BMW E30 325E M50B25NV 24V swap 5MT. 5 lug.
1999 white/grey ML430
1991 BMW E30 318i 5MT (Beater)
1990 BMW E34 525i 5MT
1997 red/black/black SL600
12-01-2009, 05:11 PM
#38
The higher rpms (2500 and up) power is good, but I could definitely use some more punch around town and at lower rpms.
SteveM.
Another 190D 2.5Turbo / 5 speed owner here. Interesting thread, and I've been wondering about this for a while also - how to get some more "low end" power. I'm running a 3.07 rearend and a 5-speed from an '84 190D 2.2 (lower ratios than the "gasser" transmissions).
The higher rpms (2500 and up) power is good, but I could definitely use some more punch around town and at lower rpms.
SteveM.
12-02-2009, 01:29 PM
#40
(12-01-2009, 07:04 PM)Jtn190D Did you do a 5 speed conversion on your car? if you did post some pics of it.
I've done 2 190D 2.5 Turbo 5-speed swaps so far. I didn't take any pics of the actual swaps in progress, but I have some pics of the finished cars. My current car actually started life as a '93 190E 2.6, into which I swapped the 2.5 Turbo engine, 5-speed tranny, 3.07 rearend, and the right front fender from a 2.5Turbo. So I've got the updated body trim and cladding of the '93, with the 2.5 turbo and 5-speed manual trans. I like this car very much - but would enjoy it even more with some additional low-end power.
SteveM.
![[Image: DSC_0102.jpg]](http://i468.photobucket.com/albums/rr44/Jetmugg/DSC_0102.jpg)
Let's see if I can figure out how to post this pic.
![[Image: DSC_0104.jpg]](http://i468.photobucket.com/albums/rr44/Jetmugg/DSC_0104.jpg)
This post was last modified: 12-02-2009, 02:04 PM by Jetmugg.
(12-01-2009, 07:04 PM)Jtn190D Did you do a 5 speed conversion on your car? if you did post some pics of it.
I've done 2 190D 2.5 Turbo 5-speed swaps so far. I didn't take any pics of the actual swaps in progress, but I have some pics of the finished cars. My current car actually started life as a '93 190E 2.6, into which I swapped the 2.5 Turbo engine, 5-speed tranny, 3.07 rearend, and the right front fender from a 2.5Turbo. So I've got the updated body trim and cladding of the '93, with the 2.5 turbo and 5-speed manual trans. I like this car very much - but would enjoy it even more with some additional low-end power.
SteveM.
Let's see if I can figure out how to post this pic.
12-07-2009, 10:45 AM
#43
George3soccer
12-07-2009, 10:45 AM #43Yea any manual tranny from a w201 will fit. Of course different gears but will fit.
12-08-2009, 02:01 PM
#46
(12-07-2009, 01:50 PM)winmutt JetMugg, nice looking car
Thanks Winmutt. It's been coming along, but still needs some of the details worked out. I painted it myself last spring, but it has a large amount of orange peel. I've just about made up my mind to do a complete re-paint.
(12-07-2009, 01:50 PM)winmutt JetMugg, nice looking car
Thanks Winmutt. It's been coming along, but still needs some of the details worked out. I painted it myself last spring, but it has a large amount of orange peel. I've just about made up my mind to do a complete re-paint.
Users browsing this thread:
28 Guest(s)
28 Guest(s)
Users browsing this thread:
28 Guest(s)
28 Guest(s)