617 N/A cylinder head vs Turbo cylinder head

STD Maintenance General 617 N/A cylinder head vs Turbo cylinder head

View a Printable Version

0 Vote(s) - 0 Average

DeliveryValve

Superturbo

1,338

12-11-2009, 11:18 AM #1

I know on the turbo motors the valves are different from the N/A. But what other things are different just on the bare head?

Is it possible to use a N/A bare cylinder head on a turbo motor?

Anybody done a side by side comparison?

.

Gota love Mercedes Diesels!

.

DeliveryValve

12-11-2009, 11:18 AM #1

Gota love Mercedes Diesels!

.

~~ForcedInduction~~

Banned

3,628

12-12-2009, 07:04 AM #2

The casting is the same. The cam, exhaust valves and tappets are different. The prechambers and glowplugs depend on the years.

This post was last modified: 12-12-2009, 07:04 AM by ForcedInduction.

ForcedInduction

12-12-2009, 07:04 AM #2

The casting is the same. The cam, exhaust valves and tappets are different. The prechambers and glowplugs depend on the years.

plurkje

turbodiesel

33

07-12-2010, 03:21 PM #3

Prechamber diameter is different
It will fit, but you'll loose some horses. Bad idea.

plurkje

07-12-2010, 03:21 PM #3

Prechamber diameter is different
It will fit, but you'll loose some horses. Bad idea.

View a Printable Version

0 Vote(s) - 0 Average

Users browsing this thread:
3 Guest(s)