STD Tuning Engine Aftermarket oil cooler for om606. Sandwich plate necessary?

Aftermarket oil cooler for om606. Sandwich plate necessary?

Aftermarket oil cooler for om606. Sandwich plate necessary?

 View a Printable Version
 
  • 0 Vote(s) - 0 Average
 
606110
Find
K26-2

42
05-22-2018, 10:24 AM #1
Reply
Reply
Is a thermostatic sandwich plate necessary for using a larger oil cooler with the om606 or do peope just add fittings to the end of the existing oil lines to/from the filter assembly?


Thanks
606110
05-22-2018, 10:24 AM #1

Is a thermostatic sandwich plate necessary for using a larger oil cooler with the om606 or do peope just add fittings to the end of the existing oil lines to/from the filter assembly?


Thanks

Reply
Reply
AlanMcR
Find
mind - blown

400
05-22-2018, 12:47 PM #2
Reply
Reply
What you are asking isn't entirely clear. The oil filter block has a built in thermostatic switch. There were a number of different oil filter + cooler designs for the OM606a. If your filter has hoses, then the flow should already be thermostatically controlled. The factory coolers seem well sized for the oil line size. Adding a bigger cooler may not make much of a difference. You could add a more powerful fan if you think that the cooling is insufficient.
AlanMcR
05-22-2018, 12:47 PM #2

What you are asking isn't entirely clear. The oil filter block has a built in thermostatic switch. There were a number of different oil filter + cooler designs for the OM606a. If your filter has hoses, then the flow should already be thermostatically controlled. The factory coolers seem well sized for the oil line size. Adding a bigger cooler may not make much of a difference. You could add a more powerful fan if you think that the cooling is insufficient.

Reply
Reply
Mr.Emo
Find
Nissan Patrol -> 606 conversion.

69
05-23-2018, 03:36 AM #3
Reply
Reply
Yoshifab has AN10 fittings that go into the original oil lines from the filter. Then you can use any cooler you want. Smile
Mr.Emo
05-23-2018, 03:36 AM #3

Yoshifab has AN10 fittings that go into the original oil lines from the filter. Then you can use any cooler you want. Smile

Reply
Reply
 View a Printable Version
 
  • 0 Vote(s) - 0 Average
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)