STD Tuning Engine rear sump for 606

rear sump for 606

rear sump for 606

 
  • 1 Vote(s) - 1 Average
 
gary andrews
4x4 builder

48
08-17-2016, 02:48 PM #1
hi after a rear sump, oil pump and dip stick, too rear sump a 606 anything out there

discovery 2 fitted om605 m pump 7.5 elements 300 turbo at mo
c250 std at mo
off road buggy fitting om 606 turbo ? supercharger ? to follow
www.gaz-fab.co.uk www.facebook.com/gazfab
gary andrews
08-17-2016, 02:48 PM #1

hi after a rear sump, oil pump and dip stick, too rear sump a 606 anything out there


discovery 2 fitted om605 m pump 7.5 elements 300 turbo at mo
c250 std at mo
off road buggy fitting om 606 turbo ? supercharger ? to follow
www.gaz-fab.co.uk www.facebook.com/gazfab

matfield
GT2256V

104
08-17-2016, 03:38 PM #2
http://forums.lr4x4.com/index.php?showto...11&page=23

A bit of info on the Land Rover forum ironically... the guy seemed to have done a bit of research.
matfield
08-17-2016, 03:38 PM #2

http://forums.lr4x4.com/index.php?showto...11&page=23

A bit of info on the Land Rover forum ironically... the guy seemed to have done a bit of research.

ross
GT2256V

109
08-18-2016, 09:57 AM #3
I'm one of the posters on that particular thread! (landroversforever on there)

You want an OM648 sump and oil pump from a W211 E Class. Not all OM648 sumps are the rear type, the S class one for example is a front bowl.

The bellhousing pattern isn't quite right at the bottom, but overlaps enough to redrill once you've filled in the thin webs with weld.
ross
08-18-2016, 09:57 AM #3

I'm one of the posters on that particular thread! (landroversforever on there)

You want an OM648 sump and oil pump from a W211 E Class. Not all OM648 sumps are the rear type, the S class one for example is a front bowl.

The bellhousing pattern isn't quite right at the bottom, but overlaps enough to redrill once you've filled in the thin webs with weld.

JoeB
TA 0301

74
08-20-2016, 08:17 AM #4
(08-18-2016, 09:57 AM)ross I'm one of the posters on that particular thread! (landroversforever on there)
Lolz... I think I'm the guy with the same Av on the other forum... 

I Better go change it so people don't draw irrational conclusions.  Cool
This post was last modified: 08-20-2016, 08:27 AM by JoeB.
JoeB
08-20-2016, 08:17 AM #4

(08-18-2016, 09:57 AM)ross I'm one of the posters on that particular thread! (landroversforever on there)
Lolz... I think I'm the guy with the same Av on the other forum... 

I Better go change it so people don't draw irrational conclusions.  Cool

gary andrews
4x4 builder

48
08-21-2016, 04:45 AM #5
thanks for info but wanted someone with one for sale

discovery 2 fitted om605 m pump 7.5 elements 300 turbo at mo
c250 std at mo
off road buggy fitting om 606 turbo ? supercharger ? to follow
www.gaz-fab.co.uk www.facebook.com/gazfab
gary andrews
08-21-2016, 04:45 AM #5

thanks for info but wanted someone with one for sale


discovery 2 fitted om605 m pump 7.5 elements 300 turbo at mo
c250 std at mo
off road buggy fitting om 606 turbo ? supercharger ? to follow
www.gaz-fab.co.uk www.facebook.com/gazfab

hooblah
Holset

401
08-21-2016, 11:31 AM #6
Good luck with that lol
hooblah
08-21-2016, 11:31 AM #6

Good luck with that lol

bricktron
'77 240D

174
08-21-2016, 02:30 PM #7
gary there is a classified section of the site.


english red rat rod 1977 240D, OM617.952 burning B99.9, iron 4-speed & 2.88 diff, 195/60/R14 on alloys, 5mph bumpers, battery in the trunk, 25mm swaybar, 4x ECE H4 lamps, double brake lamps, deleted sunroof, export zoll & california blue plates




bricktron
08-21-2016, 02:30 PM #7

gary there is a classified section of the site.



english red rat rod 1977 240D, OM617.952 burning B99.9, iron 4-speed & 2.88 diff, 195/60/R14 on alloys, 5mph bumpers, battery in the trunk, 25mm swaybar, 4x ECE H4 lamps, double brake lamps, deleted sunroof, export zoll & california blue plates




ross
GT2256V

109
08-22-2016, 02:55 AM #8
I gave up looking for the parts on their own as I was fed up of not getting any replies back from the breakers. I ended up just buying a whole engine from Ebay.
ross
08-22-2016, 02:55 AM #8

I gave up looking for the parts on their own as I was fed up of not getting any replies back from the breakers. I ended up just buying a whole engine from Ebay.

Nick S
K26-2

26
08-22-2016, 10:22 PM #9
Luke at DPUK supplies rear sump pans and pumps
Nick
Nick S
08-22-2016, 10:22 PM #9

Luke at DPUK supplies rear sump pans and pumps
Nick

50harleyrider
GTA2359VK

397
08-24-2016, 05:50 PM #10
(08-22-2016, 10:22 PM)Nick S Luke at DPUK supplies rear sump pans and pumps
Nick
700 pounds is what he quoted me. I see why guys buy the whole engine.
50harleyrider
08-24-2016, 05:50 PM #10

(08-22-2016, 10:22 PM)Nick S Luke at DPUK supplies rear sump pans and pumps
Nick
700 pounds is what he quoted me. I see why guys buy the whole engine.

ross
GT2256V

109
08-24-2016, 06:02 PM #11
That's about what my local dealer was going to charge me for the bits.
ross
08-24-2016, 06:02 PM #11

That's about what my local dealer was going to charge me for the bits.

JoeB
TA 0301

74
08-24-2016, 07:20 PM #12
You might think it sounds a little OTT, but in reality, go price the bits through a dealer for brand new parts. You may be pleasantly surprised what a discount you can get if you ask nicely.
JoeB
08-24-2016, 07:20 PM #12

You might think it sounds a little OTT, but in reality, go price the bits through a dealer for brand new parts. You may be pleasantly surprised what a discount you can get if you ask nicely.

hooblah
Holset

401
08-25-2016, 10:06 AM #13
Lol Luke. He's more expensive than Merc themselves.
hooblah
08-25-2016, 10:06 AM #13

Lol Luke. He's more expensive than Merc themselves.

Nick S
K26-2

26
08-25-2016, 06:43 PM #14
(08-25-2016, 10:06 AM)hooblah Lol Luke. He's more expensive than Merc themselves.

I guess in the end it depends what you think that they are worth to you and how badly/quickly you need the parts.  You can always break out the saw and TIG welder and try to modify what you've got
Cheers
Nick
Nick S
08-25-2016, 06:43 PM #14

(08-25-2016, 10:06 AM)hooblah Lol Luke. He's more expensive than Merc themselves.

I guess in the end it depends what you think that they are worth to you and how badly/quickly you need the parts.  You can always break out the saw and TIG welder and try to modify what you've got
Cheers
Nick

JoeB
TA 0301

74
08-26-2016, 06:32 AM #15
OM648 sump 6480140202   USD$409.60 full retail.
Oil pump is more expensive than the sump.
.pdf
OM648Mercedes OIL PUMP.pdf
Size: 273.41 KB / Downloads: 546


buy an OM648 complete
JoeB
08-26-2016, 06:32 AM #15

OM648 sump 6480140202   USD$409.60 full retail.
Oil pump is more expensive than the sump.

.pdf
OM648Mercedes OIL PUMP.pdf
Size: 273.41 KB / Downloads: 546


buy an OM648 complete

starynovy
Holset

338
08-26-2016, 01:56 PM #16
700USD Eur pounds or whatever for that? Big Grin Phew I am glad that I live there, both things on a lucky day for 50USD no more.. and since UK is in Europe too I can tell luke is a dick. Big Grin

-------------------------------------------------------------------------------------------------------------------------
Ex: 525tds 130kW, C250TD 160kW, E320CDI 200kW, ML400CDI 230kW, A6 R5TDI 130kW
Now: Q7 V8TDI 240kW, 320d 150kW, 335d 210kW
starynovy
08-26-2016, 01:56 PM #16

700USD Eur pounds or whatever for that? Big Grin Phew I am glad that I live there, both things on a lucky day for 50USD no more.. and since UK is in Europe too I can tell luke is a dick. Big Grin


-------------------------------------------------------------------------------------------------------------------------
Ex: 525tds 130kW, C250TD 160kW, E320CDI 200kW, ML400CDI 230kW, A6 R5TDI 130kW
Now: Q7 V8TDI 240kW, 320d 150kW, 335d 210kW

hooblah
Holset

401
08-26-2016, 02:37 PM #17
Hahaha no comment :/
This post was last modified: 08-26-2016, 02:40 PM by hooblah.
hooblah
08-26-2016, 02:37 PM #17

Hahaha no comment :/

JoeB
TA 0301

74
08-27-2016, 07:10 AM #18
My thing about buying new parts is a) they have a 2 year warranty and b) they are BRAND NEW. being genuine, you also can be quite assured it is not a box of PRC made shite with no quality control measures taken in manufacture.

I would buy a new oil pump. It's probably the most important component in the whole engine - since it is the part that keeps everything lubricated properly.

sump? meh - cut n shut, or new... doesn't matter too much, but even new is not really that expensive. You should try pricing a sump for an R107...
JoeB
08-27-2016, 07:10 AM #18

My thing about buying new parts is a) they have a 2 year warranty and b) they are BRAND NEW. being genuine, you also can be quite assured it is not a box of PRC made shite with no quality control measures taken in manufacture.

I would buy a new oil pump. It's probably the most important component in the whole engine - since it is the part that keeps everything lubricated properly.

sump? meh - cut n shut, or new... doesn't matter too much, but even new is not really that expensive. You should try pricing a sump for an R107...

 
  • 1 Vote(s) - 1 Average
Users browsing this thread:
 2 Guest(s)
Users browsing this thread:
 2 Guest(s)